how to do shatter effect

I have a small doubt how to do shatter effect can you please send me some tutorials link

Unexpected – “Batelco Infinity”

BATELCO "Infinity" takes you on a journey through people´s minds in a visual effects-loaded interactive film which has been causing a stir on Facebook.

At over three minutes long, the film shows several protagonists as they re-imagine the world around them, which marks the global expansion of Batelco, a leading Middle East telecom provider. Bahrain-based agency FP7/BAH teamed up with Spyfilms, Canada and City Films, Beirut, German directing duo Alex & Steffen and the german posthouse Unexpected to create this film along Batelco´s proposition of ‘Bringing ideas to life’.

After its launch on Facebook with an interactive webcam layer it soon got more than 118.000 fans and even more views – over 2000 daily new ‘likes’, an average of 83,000 daily post views, over 1 million wall impressions up to date and fans from 43 countries across the globe.

Besides one single take where the RED camera was used (the shot with the opening elevator door and the skater) the whole film was shot by New York-based DoP Simon Coull on four Canons 7D, two 5Ds and the coolest gear like Eric Austin´s small camera helicopter from www.helivideo.com.

German-based studio Unexpected Postproduction produced over 100 visual effect shots for the film, ranging from small enhancements, sky replacements, digital animals and stunt-doubles to a subway transforming into a huge rollercoaster rushing inbetween high rise buildings, F1 racers chasing each other on city streets and futuristic gliders blasting through the city canyons. A large number of those shots are 100% CG as they would have been almost impossible to get in real life!

Spot:
http://vimeo.com/16918756

Making-of:
http://vimeo.com/16766688

Agency: FP7/BAH
Director: Alex & Steffen
DoP: Simon Coull
Production: City Films Production, Beirut
Executive Producer: Marc Hadife
Producer: Joyce Hadife
in collaboration with Spy Films, Toronto
Executive Producer: Carlo Trulli
Producer: Peter Oad
Postproduction: Unexpected GmbH, Stuttgart
VFX Supervisor: Alex & Steffen
Lead 3D Artists: Sebastian Badea, Jörg Häberle, Harun Celebi, Alexander Kiesl, Stefan Kleindienst, Marcel Kühn, Johannes Wünsch
Lead 2D Artists: Claus Rudolph, Steffen Hacker
Music by: AOC Paris


A Technical Study on VFX!?

Hi All,
I have been around here for a while but haven’t had anything useful to say so this is actually my first post!

Anyway, I am writing a technical document on VFX for film and production whilst looking at specific titles. Ideally, as I am writing my dissertation for Games Design, I can focus on games related productions such as any live cutscenes that contain VFX.

I have barely made a start and as I am totally new to this subject dont know where to begin, any helpful pointers would be great. I am now off to find the answer to; the percentage of effects that are added in post production!

thanks for reading!
Phil

visual effects technology

can anyone tell me about any vfx technologies which is invented particularly for the need of a specific movie and later the effects could be used in other films…:mad:::confused:

Endhiran ( ROBOT) vfx showcase – INDIA CHASING HOLLYWOOD

INDIAN BIGGEST BUDGET MOVIE TO CHASE HOLLYWOOD BIG WIG

Endhiran at IMDB

The multi-crore Rajinikanth-starer Endhiran (Robot) opened to a frenzied response in theaters across worldwide on OCT 1st.The trilingual movie in Tamil, Hindi and Telugu with English subtitles produced by Kalanidhi Maran and directed by Shankar has Rajinikanth and Aishwarya Rai in the lead roles. It‘s a sci-fi emotional movie in which Rajinikanth plays a dual role of a scientist and a robot. The scientist Dr. Vaseegaran creates a robot with artificial intelligence and names it as Chitti, the film goes on to show how Chitti mingles with society.

Its a visual effects showcase to the world audience from India. Biggest budget film ever made in India,Which dawns a eye opener in the visual effects industry with the collaboration of the best resources both from western and Indian technocrats ($41,675,740 approximate). The movie required a unobtrusive VFX of over 2000 shots that add up to around 60 scenes in the film. V.Srinivas Mohan handled the entire film Visual effects as a Vfx supervisor. Frankie Chung and Eddy Wong were the additional supervisors for there respective work.

The Visual effects of the film glimpse the boundaries with collaboration of studios like LA based Legacy effects US (Stan Winston Studios), Indian Artists Computer Graphics Pvt. Ltd(Chennai), Menfond(Hong kong), kinomotive(Hong Kong), Hyderabad based Firefly Studios, Chennai based VenSat, Pixion, EFX Prasad Studios, Ocher Studios, Mayans Creatives. Also some freelancers from London, Canada, Iran, Germany, France and Hong Kong were part of the project. The 80% of the VFX work has been handled by Chennai based studio Indian Artists Computer Graphics Pvt. Ltd.Indian Artists had been earlier facilitated with 2 Indian National Award for excellence in Visual effects for film by Indian government. Lastly been grabbing the award for its excellent work in Tamil Movie – “Shivaji” for Digital Skin grafting technology used in the Film song. Making a Indian superstar look like European complexion.

Considering the budget and time line. Budgeting and VFX scheduling had been the crux of the project to get it delivered. Mr.V.Srinivas Mohan had the dual role of being a VFX supervisor of the film and VFX producer along with Mr.T.K.Jayakumar in roping the right resources across the world.

V.Srinivas Mohan shared "One of the challenge was to get international standards in Indian budget. For that We have used lots of techniques such as the pre production with detailed pre visualization, Animatroincs and Light stage face scanning which were much appreciated and welcomed by studios in the Hollywood when we approached them for their services. Thanks to Director Shankar sir for fresh and wild ideas with emotional sc-fi script. The animatronics was used in about 22 scenes in total for the movie. All the resources and technology available at Legacy effects were used for the same including puppets, mannequins and special make-up. 2 main Robot puppets ware designed and build exclusively for this project. About 40 mannequins of The Robot Ranjinikanth were got from Legacy Effects studio for the scenes involving number of robots." The Vfx team has used some unique technology such as the Doom Light stage scanning for detail high resolution CGI face. Also the Indian Artists have developed a new proprietary skin shader plugin with the help of Jupiter Jazz, the developers of shake. The shader is open source and the code for it is available at https://code.google.com/p/jupiterskin/.

Pre visualization was one of the most important part of the visual effects work involved in the movie. Sanath P.C from Firefly Studios Supervised on the pre production of the scenes. About 40 scenes were pre visualized in the preproduction stage and done in animation before going in for the shoot. The pre production for these scenes alone took about 6-7 months.

Some of the Major jinx in the visual treatment were the motion control shots which had multiplication of the ROBO character. Which involved lots of planning before going for the shots and getting it 100% done with less penny shed. Having the Frame information of the top and bottom in the super 35 format, Indian Artists devised a Camera rig to get perfection with manual control without the actual motion control rigs, Which costs huge pie and time consuming, if it were been used for complete project. Association of Legacy Effects had given the right value addition to film with live interactions and necessary story blending which was never been attempted in Indian Cinema. Mr.Vance Heartwell and Mr.Alan Scott has helped in all stages of the animatronics and special make-up.

Motion Graphics and Head UP Displays in the film have been Minor Parts which was taken care in detail to reveal the story and give the science fiction texture to the visuals. Which had been complete undertaking at Indian Artists. Direction Team was keen in not having too many eye poppers in actually spoiling the storyline. The Story establishes the robot character to distinguish from the scientist which was donned by the same superstar Rajinikanth. Which involved lots of head removals and dual character interactions with live with Animatronics blends with character movement. Which had a meticulous planning in execution and shot planning with seamless blending of compositing.

The Seamless blending of Key frame Animation,Motion capture, Animatronics, Multi Robots, Real model/texture scan of character had given the right photo-real blend to story. VFX have been seamless and consistent with right color timing from the DI Team lead by Mr.Ken, Reliance media works.

The most interesting and challenging sequence in the movie was the climax sequence. The climax sequence involves 100s of robots grouping into a cluster with their electromagnetic powers and forming different shapes and forms of characters such as a giant snake and giant human. "Each of the robots had a separate biped and each of them had to be animated to for the formation of the final form and characters to be smooth, such the formation of the head of the giant snake. It was a challenging and exciting task to bring about the desired output. Frankie Chung worked on the character designs for the climax sequence and Jack Ho has helped on location" added Mr.V.srinivas Mohan.

"It was a wonderful experience working for the project. I have to thank entire Vfx team, Director Shankar, Actor Rajini, Producer Sun pictures Kalanithi Maran, DOP Ranthnavelu, Art Director Sabu and Editor Antony for giving their great support in this entire execution process. For the audience the movie is an experience of few hours, but for us it was an unforgettable experience of about 3 years. We enjoyed each and every day and the last 6 months had been sleepless nights" thats how Mr.Srinivas gratitude’s the effort with humble smile.

Indian Artist Computer Graphics Pvt. Ltd.
www.indianartists.co.in
Blog – www.srinivasmohan.wordpress.com
twitter – @srinivas_mohan

Moral Relativity – Notes on Lumix GH1 DSLR Workflow

Hello, fellow vfxtalkers. Earlier in the year, I worked on a short film with a friend of mine. For both of us, it was our first project using a DSLR-type camera. I was talking to another friend about some of what I have been doing on the film, and he suggested that I ought to write up some of my thoughts and share my experiences.

I figured it was as good of an excuse as any to install Word Press and start blogging. This first entry is largely a sort of mini-review of the camera that we were using, and how it did during production. It turned out to be quite a long post, so I’ll save some of the details of how we are handling the 4:2:0 AVCHD compressed footage while trying to be obsessive about not losing any quality for another post.

Anyhow, here is my first post:
http://www.willrosecrans.com/blog/20…-notes-part-1/

If you find this interesting, or have any questions as a result of this, or think of anything specific that you’d like me to hit in the next post, please let me know.

Resident Evil Has 3-D Afterlife

city elevation

Hi mates, I’ve got a doubt and may be one of you found a trick for it before.

I’ve got to model a volume elevation for a industry zone in barcelona, and I found most of the buildings done in google earth, but I can’t download them, just a few ones.

Does anybody know how to get them all at a time, or even one by one (a pitty option but… usefull)

Thanks everyone!

Which should I do?

Hello people reading this thread, I wanted to ask your opinion on what I should do for my next project. Should I do Fire Bending (based on avatar the last ait bender) or air bending.

Thanks in advance,

Trevor

Siggraph2007 – ILM – Transformers youtube clips…

hey all
apologies if these have been put on this site before but I thought I’d share them. Basically some chap filmed a couple of 10min clips showing the various tricks n techniques the guys at ILM did for the 1st transformers film. There’s some really good thoughts n tricks and I couldn’t find any case study stuff for transformers on this site so thought this might provide a good substitute 🙂 Its been a good source of reference for my own transformer wip too.

ILM – Production Technique
http://www.youtube.com/watch?v=2LSgv41oXc4

ILM – Transformations
http://www.youtube.com/watch?v=YeDfRvvLaFE

ta
ant